|
Post by 4bangerYJ on Nov 5, 2010 5:17:47 GMT -8
So I have been chasing a vibration and clicking noise for a while. Yesterday it became clear where its coming from.So if anyone has a transmission jack I can use it would be greatly appreciated. Tonkas gonna rebuild I just got to get it out. Thanks JIM
|
|
|
Post by themooses on Nov 5, 2010 7:06:41 GMT -8
So I have been chasing a vibration and clicking noise for a while. Yesterday it became clear where its coming from.So if anyone has a transmission jack I can use it would be greatly appreciated. Tonkas gonna rebuild I just got to get it out. Thanks JIM You can borrow one from here if you want to come get it.
|
|
|
Post by 4bangerYJ on Nov 5, 2010 10:39:57 GMT -8
Thanks Moose If a closer one does not come available I give you a call next week JIM
|
|
Wyldman
Active Member
Safety & Education Chairman
IXOYE
Posts: 643
|
Post by Wyldman on Nov 5, 2010 18:16:49 GMT -8
If you're interested... I have a AX 5 trans in my garage you can use for parts. I believe 3rd gear is out but if you want it, I'll sell it to you for what I paid for it $80.00. Let me know.
Douglas
|
|
|
Post by 4bangerYJ on Nov 5, 2010 23:24:39 GMT -8
Thanks Douglas I'm pretty sure mine a AX 15 But will Keep that in Mind
JIM
|
|
|
Post by m38crawler on Nov 23, 2010 14:27:50 GMT -8
Unless someone swapped one in from a 4 cylinder dakota, you have an AX-5...
|
|
tonka
Ok to Drive
My Heep
Posts: 256
|
Post by tonka on Nov 26, 2010 6:14:37 GMT -8
Hows that Jeep coming did the trans Jack work out for ya?is the vibration gone?
|
|
|
Post by 4bangerYJ on Nov 26, 2010 23:35:05 GMT -8
Spent most of the day Friday putting the tranny in. Jack worked great. I now have a very smooth shifting vibration free jeep. It works aw some. I replaced the ujoints on both drive lines also.Thanks Tonka and good Guys Auto Care for the rebuild.Gonna put a few miles on it saterday and check for leakes but all lookes well so far. JIM
|
|
tonka
Ok to Drive
My Heep
Posts: 256
|
Post by tonka on Nov 28, 2010 8:00:21 GMT -8
Good and Glad its all working well, Was my pleasure what goes around comes around!! Thanks 4bangerYJ for the wiring work at my shop!!! Now lets go wheeling
|
|