|
Post by petee on Mar 27, 2012 11:26:15 GMT -8
From my CL ad
This is a big brake kit/5 lug conversion for a CJ Dana 30 or any Dana 44 to convert form 8lug or 6lug to 5x5 1/2 bolt pattern. It uses GM spindles and Ford hub and rotors. Just Google (5 lug Dana 44 conversion) I used it to convert a Waggy D44 to work in my CJ. I am going 8lug so I don't need these parts. List includes
2x spindles 2x hubs 2x Rotors 2x Inner bearing 2x Outer Bearing Disc brake caliper bracket
All parts are in good working order bearings were professionally installed 6 months ago with marine grade grease and have 3 trail runs and maybe 300 street miles. I am keeping the brake pads, calipers, and locking hubs. These parts are cheap enough to replace all Jeep Wagoner's used the ones you will need and can be picked up at any auto parts store.
I am interested in trading for: a complete 8 lug Dana 44 front, low speed Dana 44 locker, Full Float rear Dana 60, corp 14 bolt with gears and disk, Dana 60 locker, other 4x4 stuff maybe, cash I work nights so text or leave a message and we'll figure it out. five 0 three 7 five 0 31 three 4 Crawler, Irok, Iroks, procomp, mud, Jeep,
|
|
|
Post by fivendime on Mar 27, 2012 20:03:47 GMT -8
Would this by chance fit my Dana 25 on my Willys? Im looking to get a set from Woodys for the rear and front but if I can save myself a few bucks on a used set for the front I would. Then purchase a set for the rear. Also, got an idea of a price. Feel free to PM me.
Thanks
|
|