|
Post by joshwho on Nov 5, 2011 22:41:19 GMT -8
I have two four wheel drive Turbo 350 transmissions that would need to be gone through. Either of these could be converted to 2WD with a tail housing and tailshaft. I have one that I have driven, but third gear started slipping a little too much for me, so I took it out before it because a complete pile of junk (the pan on this transmission does not go with it, so you will need a pan for it). The other came to me in a rig that had no engine, so I DO NOT know the internal condition of it, but the fluid actually looks really good. BOTH OF THESE TRANSMISSIONS ARE GREASY AND WILL NEED TO BE TORN COMPLETELY DOWN AND RE-SEALED AT A BARE MINIMUM FOR THE ONE I HAVEN'T DRIVEN (BUT I WOULD BANK ON IT ONLY BEING A CORE) AND REBUILT FOR THE ONE THAT I HAVE DRIVEN. I didn't post any pictures because I sure hope someone looking for a turbo 350 knows what a core looks like. will trade for a dana 300 transfer case, 14" travel or larger remote reservoir shocks, I'm going to try the toyota thing, so toyota dual transfer case adapter, 4.7 toyota case gears, 23 spline input, 30 spline output, toyota crossover steering, Toyoya IFS steering box, stock 2 1/2 ton rockwell wheels, or other crawler parts (cash might need to be exchanged on some trades).
|
|