|
Post by windturbine1 on Nov 15, 2009 16:23:57 GMT -8
is anyone good at re-building quadrajet carbs? specifically tuning it after the re-build. i can re-build the one i have i just need a little help tuning it in. the motor is a stock 350 thats in my suburban. can anyone help?
|
|
flipflop
Ok to Drive
attitude is everything
Posts: 178
|
Post by flipflop on Nov 16, 2009 17:41:09 GMT -8
is anyone good at re-building quadrajet carbs? specifically tuning it after the re-build. i can re-build the one i have i just need a little help tuning it in. the motor is a stock 350 thats in my suburban. can anyone help? Only people I know: James at www.Overthehill4x4.com (in portland) he has a q-jet on his daily driver toyota w/305ci in it. Or the guys up in Woodland www.nw-offroad.comBoth shops are very, very reasonable and good people. flip.flop
|
|
|
Post by fivendime on Nov 16, 2009 19:44:18 GMT -8
I had David Chun at Super Tune do my quadrajet on my willys pickup. I dont have any issues with it, but I am a Holley fan at heart.
|
|
|
Post by hootie on Nov 16, 2009 19:58:14 GMT -8
|
|
|
Post by bigstuck on Nov 17, 2009 19:55:27 GMT -8
HE has since gone out of buisness. Go see dave at Super Tune. He is the man with quadrajets. We can do them to just were super busy right now. Dave did my quadrajet on my mild build 360 back when and he did a superb job on it.
|
|
|
Post by mudmaddness1972 on Dec 4, 2009 17:58:54 GMT -8
is anyone good at re-building quadrajet carbs? specifically tuning it after the re-build. i can re-build the one i have i just need a little help tuning it in. the motor is a stock 350 thats in my suburban. can anyone help? i am good with q-jet done lots of them ..
|
|
|
Post by mudmaddness1972 on Dec 4, 2009 17:59:49 GMT -8
what wrong with it
|
|
|
Post by windturbine1 on Dec 4, 2009 18:59:56 GMT -8
i have an electric model carb. i picked up a non electric one and i need to rebuild it. i can rebuild it but tuning it is a problem. i dont know enough about them to tune it properly. i want to switch carbs to be able to take off the emission stuff.
|
|
|
Post by mudmaddness1972 on Dec 4, 2009 19:04:59 GMT -8
its is easy to tune
|
|